Spray Foam Insulation in Hayden, ID
Empire Insulation sprays closed-cell foam in Hayden, for new builds, garages, attics, shops and pole barns. Nick Bond quotes each job himself and sprays it with one consistent crew member, so the person who prices it does the work.
Estimates are free, and open-cell is available on request.
Last updated
Spray foam for Hayden new builds, garages and shops
Get closed-cell foam into the walls and roof while the framing is open, and the person who quoted it is the one spraying it.
Request your free estimate
Name, phone, email, town or address, building type, project type, approximate square footage, timeline, photos of the space, and how you heard about Empire.
Call (208) 292-6255Company details
- Owner since April 2022Nick Bond, owner
- 5.0 on Google9 reviews
- Licensed & insuredLicensed in Idaho
- Ratio-monitored rigApplication reports on request
What we do in Hayden
On a Hayden build, schedule the foam before the drywall
Hayden sits just north of Coeur d'Alene near Hayden Lake, north of Empire's base in St. Maries. If you are building or adding on there, the most useful thing Nick can tell you is when to call: while the framing is still open. Foam goes into the walls, rim joists and roof before any drywall, and every gap around plates, wires and boxes gets sealed in the same pass.
Closed-cell suits that stage because it packs roughly R-6 to R-7 into each inch and slows water vapor. At 1.5 to 2 inches it reaches a Class II vapor retarder, which helps keep moist indoor air from condensing inside a cold wall through a North Idaho winter. Living spaces then need an approved thermal barrier over the foam, usually drywall, which a separate trade hangs.
If the budget is tight, Empire can do a hybrid: part spray foam and part fiberglass, with foam where it does the most good. Nick will also tell you straight when foam is not worth it, such as a building you plan to sell within 1 to 2 years.
Empire's foam in Hayden is closed-cell, in 2-lb or HFO. Here is where it goes on the jobs that come up most, with links to each service below.
Closed-cell spray foam
More insulation per inch than open-cell, plus air sealing and a vapor-retarding layer in one pass. Open-cell is available on request.
New construction insulation
Sprayed into open walls and roofs before drywall. Tell Nick your framing schedule so foam lands between rough-in and close-up.
Garage and shop insulation
Detached garages and shops get foam in the walls and roof. For a heated shop, the rule of thumb is 2 inches on the walls and 3 on the roof.
Attic insulation
Foam on the roof deck or the attic floor. A roof-deck conversion needs a ventilation and moisture plan before anything is sprayed.
Pole barn spray foam
Foam on the panels and between girts keeps warm, moist air off the cold metal. It does not stop a roof leak.
Hybrid insulation packages
Part spray foam, part fiberglass, to bring the cost down while still sealing the spots that leak the most air.
Crawl spaces
Foam on foundation walls and rim joists, with vapor barriers or encapsulation as needed. Drainage problems need their own fix.
Additions and retrofits
Adding a room or opening an old wall gives access for foam. Empire does not do blown-in insulation or insulation removal.
Not sure what you need? Request your free estimate
Photos from our jobs
These are Empire's own photos: an attic mid-job, a garage wall and metal buildings. Look at how the foam follows the roofline and the corrugated steel.
1 / 4
Want work like this? Request your free estimate
Customer reviews & pricing
-
I've utilized many insulation companies over the years and rarely write reviews, but Nick and his guys did an outstanding job and I would HIGHLY recommend them. Their price was excellent, the work was perfect, and they are extremely clean and organized.
Scott D. · Angi ·
-
Best job and best price
Doug G. · Angi ·
What affects the price
No price list here: Nick gives a rough estimate from your plans or photos and a firm quote once he has seen the job. Estimates are free, and veterans and service members get a discount that depends on the job.
| Job | What affects the quote |
|---|---|
| Closed-Cell Spray Foam | Area sprayed, installed thickness and access |
| Shop & Garage Insulation | Building size, wall and roof area, and how the space is used |
| Pole Barn Insulation | Building size, wall and roof area, and foam thickness |
| Crawl Space Insulation | Wall and rim-joist area, access and moisture plan |
| Attic Insulation | Insulated boundary chosen, area and access |
| New Construction Insulation | Wall and roof area and the build stage |
| Commercial Insulation | Scope, access and time out of the work area |
| Metal Building Insulation | Steel area covered, surface condition and access |
| Retrofit Insulation | Open areas, access and existing materials |
- Build stage: Open framing is the fastest to spray. Once walls are closed, access drives the method and the time on site.
- Foam choice and depth: 2-lb and HFO closed-cell differ in material, and deeper foam uses more of it. A hybrid package lowers the foam needed.
- Sprayed area: The wall, roof and rim area being foamed sets the price, not the home's floor area.
- Barriers and prep: Masking windows and any required thermal or ignition barrier change scope. Compare bids that include the same items.
Your job, your price: Request your free estimate
Questions we get
Does Empire Insulation work in Hayden?
Yes. Empire is based in St. Maries, and Nick Bond travels 100+ miles for projects in Idaho, so Hayden is on his map. He quotes each job himself and sprays it with one consistent crew member. Call or text with the build stage and the areas to insulate.
When should spray foam go in on a new house?
After the framing, plumbing and wiring are roughed in and inspected, and before drywall. That is when every cavity is open. Give Nick your schedule early so the spray day fits between rough-in and close-up, and plan the thermal barrier that goes over the foam.
Is spray foam worth it, or should I just use batts?
Foam usually pays for itself in 3 to 10 years. If you plan to sell within 1 to 2 years, you probably will not get your money back, and Nick will tell you so. A hybrid of foam and fiberglass is an option when the budget is tight.
Can you insulate my detached garage or shop?
Yes. Closed-cell goes in the walls and roof of garages and shops. For a heated shop, Nick's rule of thumb is 2 inches on the walls and 3 on the roof. Exposed foam can be painted for a finished look; paint is not a thermal barrier.
What should I send for a Hayden estimate?
Send the address, plans or rough dimensions, the build stage, how the space will be heated and used, and photos of the framing. Nick gives a rough number from that and a firm quote after seeing the job. Estimates are free.
Question not here? Request your free estimate
About Hayden, ID
Where Hayden sits and the nearest towns we also serve. Distances are straight-line miles from map coordinates.
- County
- Kootenai County, ID
- From St. Maries
- About 33 miles in a straight line
- Nearest towns we serve
- Coeur d'Alene (about 6 mi), Rathdrum (about 6 mi), Post Falls (about 8 mi)
- Local note
- Just north of Coeur d'Alene, near Hayden Lake
Building or finishing a garage in Hayden?
Call or text Nick before the drywall goes up. He quotes Hayden jobs himself, sprays closed-cell foam and the estimate is free.